Split-type vacuum freeze dryers, FD-30 to FD-200, for raw meat pieces, organs, complete-diet nuggets and treats.
INNOTECH builds industrial vacuum freeze dryers for raw pet food and treats, from the 30 m² FD-30 to the 202 m² FD-200. Freeze-drying keeps meat nutrition and palatability, and the finished product is shelf-stable without preservatives. A 60 m² INNOTECH system dries about 800 kg of a beef and chicken formula per batch, on a typical 20–24 hour cycle, at a U.S. pet food plant.

Confirmed in the quotation, scheduled from the deposit
T/T: 40% deposit, 60% balance before delivery. Final terms confirmed before contract
1 year from dispatch against workmanship defects; wear parts excluded
FD-30 and larger: we install, commission and train on site
Every machine passes a pre-delivery acceptance test at our factory.
Size by water capture (ice condenser capacity), not just shelf area. Water capture is the water removed per batch, not product output. Figures from our model specifications; final values per technical agreement.
| Model | Drying area | Water capture / batch | Power (380 V / 50 Hz) | Pet food product / batch |
|---|---|---|---|---|
| FD-30 | 30 m² | 400 kg | 75 kW, steam heating | On request |
| FD-60 | 60 m² | 600 kg | 100 kW, steam heating | ≈ 800 kg beef + chicken formula (U.S. project) |
| FD-100 | 100 m² | 1200–1300 kg | 170 kW, steam heating | On request |
| FD-200 | 202 m² | 2400–3000 kg | 350 kW, steam heating; freezing room included | On request |
Product per batch depends on your formula and tray loading; the FD-60 figure is from a production project. All four are split-type systems built to your destination voltage and frequency, for example 380 V/50 Hz or 440 V/60 Hz. Step-by-step sizing: How to choose an industrial freeze dryer.
Cycle time for raw pet food is set first by piece size and fat content, then by how densely the trays are loaded.
On our U.S. project, a composite beef and chicken formula runs a typical cycle of 20–24 hours in a 60 m² system. The customer needed stable quality from batch to batch, a cycle that balances throughput against the appearance of the finished pieces, and room to adjust parameters as piece size and moisture vary between production runs.
A 60 m² INNOTECH system at a U.S. pet food plant is configured like this:
| Stage | How it is configured |
|---|---|
| Pre-freezing | Raw material is frozen in cold storage at around −18 °C before it enters the freeze dryer. For individually frozen pieces, our SD-series IQF tunnels freeze 500–1500 kg/h. |
| Refrigeration | An industrial refrigeration unit drives the condenser that captures the water vapour. |
| Vacuum | Vacuum pumps hold the chamber at the low pressure needed for sublimation. |
| Heating | Shelf heating uses steam, the usual choice for systems above about 30 m². |
| Control | PLC control with recorded process parameters; Siemens PLC configuration is available. |
For each project we adapt the drying area and loading layout, the heating method, refrigeration and vacuum capacity, control and data recording, and the voltage and frequency to your plant. See how vacuum freeze-drying works.
Pathogen control for raw materials is agreed with your food-safety team before scale-up. The chamber is 304 stainless steel, 6 mm thick, with an inner roughness of Ra ≤ 0.5 μm and medical silicone door seals.
We prove your material on a pilot unit and fix the drying curve and capacity. We then size the machine or line to your output and site and build it in our own workshop in Zhucheng, Shandong. Our engineers install, commission and train on site until production is stable, and we supply spares and technical support across the machine's working life. Supply can be a single machine, a matched group of 2 to 5 machines, or a complete line.
To size your system, have ready: your formula and its moisture, wet load per batch, daily output target, and destination country and voltage.



From the U.S. pet food project. Read the full case study
Tell us your formula, wet load per batch, daily target and destination voltage — an engineer will size the system and quote. We usually reply within one business day.
Every freeze dryer, drying and IQF model with specifications, build standards and what we need for a quotation. 6 pages, 1 MB.